OZ9HMN HOMEPAGE

 

PAGES:

Op
Beacon
PMR 446
OZ9ZZ tower
SAT Project
OZ9HMN tower
Vertical Antenna
Making PCB
Generator
Remote of Rig

 The antenna project at OZ9ZZ

THE FIRST PART OF THE PLAN

 

In the year 2005 Jens Ole "OZ9ZZ" bought a new antenna mast that should replace the old one.

This was a launch for a co-operation that were going on for some time.

The old bed was recycled and this gave a little problem, the new mast were bigger.

Itīs was decided that he should have an teansitional from for the new mast.

You can see the images from the work below.

We owe a large tanks to Lindahl Nielsen for spending some time at this projekt.

 

"Dual clicking at the picture to do it bigger"

The new mast on the old template.

 

Then the destination were decided

The foot on the old mast.

Measuring on the new transitional form.

Cutting up , this was a job for Lindahl.

And more cutting up.

And nearly finished.

And so were the cutting up were finished.

The transitional form has been installed.

The new antenna mast is installed and ready for use.

THE DUCK PART OF THE PLAN.

Then the mast up and we shall install all of the antennas, transmission lines, rotors and converters to the different band.

This takes some time , however it suceeded at last.

Then the mast came up, and now the rotors has been adjusted for the antenna

The rotor is actually adjusted.

OZ9ZZ at the mast.

Time for installing the transmisions lines.

And mounting.

Transmisions linesis connected.

For the first time the masten was going up whit all the antennas and cables mount.

And it is fairly easy to get up

However it takes some time.

But it were hoisted.

The antenna in itīs max at 18 meter + the top.

21 meter to the top.

Tower at date: 02 January 2010

Top of the tower on date: 02 January 2010